 |
Fitting Instructions • Thoroughly clean both the headlight and the protective cover. Surgical Spirit BP is available from your local pharmacy and is a very effective cleaner. • Familiarise yourself with where the protective cover fits on the headlight and you can decide its final positioning. • Both the ST1100 and ST1300 covers require 5 fixing points (3M Dual Lock Fixings) - one fixing on each corner and one ‘middle top’. Fitting tips… ST1100: A very easy cover to fit because of its simple shape. • Remove the backing from 5 of the fixings and place these on the protective cover (each corner and ‘middle top’). • Fit remaining fixings on to the 5 you have put on the cover. • Remove the backing from each of the 5 fixings and carefully align the cover on to your headlight. • Firmly push the cover into your chosen position and allow the adhesive time to set or cure e.g. overnight. ST1300: Due to the shape of this cover, the following procedure should help you achieve a satisfactory result. • Remove the backing from the 5 of the fixings and place these on the protective cover (each corner and one ‘middle top’). • Fit the remaining fixings on to the 5 you have put on the cover. Now follow the next 3 separate steps: 1. Remove the backing from the 2 top corner fixings. Very carefully align the cover up with your headlight and firmly push the cover on to the headlight to ensure you get these 2 fixings to adhere effectively. Ideally, leave the cover on the headlight overnight – this allows the adhesive to set or cure. 2. Remove the cover and repeat 1. above for the 2 bottom corner fixings. 3. Remove the cover and repeat 2. above for the ‘middle top’ fixing. |
|
|